Concrete Diamond Drilling, today our operatives have finished off the last of the drilling of 20mm holes 400mm deep in reinforced concrete allowing for us to install dowel bars and Hilti resin to affectively stitch two 225 slabs together. This was all carried out with our dustless drilling system allowing other works to carry on […]
Our operatives once again making short work of removing Reinforced Concrete Walls for a client in the East Midlands. Combined with just a Hammer and an Angle Grinder we are able to carry out these works with little disturbance to surrounding College Classrooms. For any enquiries or your FREE quotation please contact Birmingham Diamond Drilling […]
We were asked by Midland Metro Alliance to remove 14lm of 600mm chamfer section from a gunite arch supporting a bridge in Broad Street, Birmingham. This work was being carried out so that the bridge could be further strengthened to take the extra weight of the new Trams travelling over it. The method used was […]
Following the results of our recent test coring, the client asked if we could remove and replace the unsuitable areas of floor slab. Well done to our operatives for stepping up and turning their hand to something they don’t normally do including the stress and mass of pumping 30 cubic meters of concrete!!